 |
| Dimensions |
16.4" x 6.5 " (41.66cm x 16.5cm) |
| Form Factor |
Proprietary |
| |
|
| CPU |
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below:
Quad-Core Intel®
Xeon®Processor
5400/5300LV sequence (Harpertown
/Clovertown processor)
up to 3.20 GHz
Dual-Core Intel®
Xeon®Processor
5200/5100LV sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
| System Bus |
1600 / 1333 / 1066 MHz system bus |
| |
|
| DIMM Sizes |
512 MB, 1GB, 2GB, 4GB, 8GB |
| Error Detection |
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| Memory Capacity |
Eight 240-pin DIMM sockets
Supports up to 64 GB 800* / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported |
| Memory Type |
800* / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| Memory Voltage |
1.8 V or 1.5 V |
| |
|
| Chipset |
Intel® 5400 (Seaburg) chipset
ESB2 |
| Clock Generator |
CK410B |
| Graphics |
ATI ES1000 controller with 32 MB of video memory |
| Infiniband |
Mellanox ConnectX IB Infiniband 20Gbps PCI-E 2.0 Controller |
| IPMI |
Support for Intelligent Platform Management Interface v.2.0, v.1.5
200-pin IPMI slot (SIMSO(+))
(Optional: AOC-SIMSO(+)) |
| Network Controllers |
Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking |
| SATA |
Intel ESB2 SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux) |
| Super I/O |
Winbond 83627HF chip |
| |
|
| Infiniband |
1 External Infiniband Connector |
| LAN |
2x RJ45 LAN ports |
| Serial ATA |
Four Serial ATA ports |
| Serial Port |
1 Header |
| USB |
2x USB rear ports
2x USB internal headers
Total 4 USB 2.0 Compliant |
| VGA |
1x VGA Port |
|
 |
|
| 1U |
SC808T-980
|
| 1U |
SC808T-980
|
| |
|
| PCI-Express |
1 (x16) PCI-e Generation II slot
|
| |
|
| BIOS Features |
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
SMBIOS 2.3
|
| BIOS Type |
8Mb Flash EEPROM with Phoenix® BIOS
|
| |
|
| Environmental Spec. |
Operating Temperature: 10° to 35°C (50° to 95°F)
Non-operating Temperature: -40° to 70°C (-40° to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
| RoHS |
RoHS Compliant 5/6, Server Exemption
|
| |
|
| CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
|
| FAN |
Total of four proprietary fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
|
| LED |
CPU / System Overheat LED
|
| Other Features |
Chassis intrusion detection
Chassis intrusion header
|
| Temperature |
Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
|
| |
|
| Power Configurations |
ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
|
| Software |
Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
Super Doctor III
Watch Dog
NMI
|
|
